Rubber components for lighting and LED luminaires
Exonel makes the seals that keep LED luminaires dry: lens and housing gaskets, driver compartment seals, cable grommets and sponge sealing strips. Made to drawing in silicone for heat and weather, or EPDM where cost matters more than temperature.
Rubber parts for lighting.
Lens and housing gaskets
Moulded or joined gaskets between the lens, the housing and the back cover.
Driver compartment seals
Gaskets and grommets that keep water out of the driver enclosure, designed for IP67/IP68 sealing applications.
Cable grommets
Grommets and strain reliefs moulded to the cable diameter.
Sponge sealing strips
Closed-cell silicone or EPDM strip for lightly clamped covers.
Compound follows the conditions.
Heat from the LED board
Luminaire housings run warm for years. Silicone keeps its seal where other rubbers harden.
Sun and rain
Outdoor fittings face UV, ozone and rain. Silicone and EPDM both age well outdoors.
Thin sections
Slim luminaires need thin, soft gaskets. Sponge and low-hardness silicone compress under light clamp force.
What to send us
Send the housing or gasket drawing, the groove or clamp detail, the operating temperature and the target IP rating. Tell us if the fitting is indoor or outdoor.
Common questions
Which rubber is best for LED luminaire gaskets?
Can your gaskets help a luminaire reach IP66 or IP67?
Do you make gaskets for large street-light housings?
Need luminaire gaskets or seals?
Exonel Industries makes custom moulded and extruded rubber components in Howrah (Kolkata), West Bengal, and supplies manufacturers across India. We work in six base polymers, Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into hundreds of compounds. Compounding, tooling and production are done in-house. Send a drawing, a sample or a specification for a quote.
