Custom rubber components, made to your drawing
Exonel Industries makes moulded and extruded rubber components to drawing for OEMs and engineering teams across India. Send a drawing, a sample or a specification. We select the compound, cut the tooling and make the part in Howrah, Kolkata, West Bengal.
Built around your part.
Moulded parts
Gaskets, seals, O-rings, grommets, washers, bushes and mounts, compression-moulded to your geometry. Rubber-to-metal bonding available.
Extruded parts
Profiles, channels, strips, cords, tubing and sponge sections in constant cross-section, cut to length.
Six base polymers
Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into the compound the duty needs.
Tooling in-house
Moulds and extrusion dies are made for your part.
Prototypes to production
Built for OEM production runs. Samples and first-off parts come first, on the same tooling.
Import substitution
Send the imported part. We match it and make it locally.
Six base polymers, compared.
Temperature range, hardness and resistance for typical commercial compounds of each polymer. Ratings run from A (excellent) to X (not suitable).
| Material | Temp range (°C) | Hardness (Shore A) | Oil | Fuel | Acid | Base | Water / steam | Ozone / weather |
|---|---|---|---|---|---|---|---|---|
| Silicone (VMQ) | −60 to +225 | 20 to 90 | C | D | C | C | B | A |
| EPDM | −45 to +150 | 30 to 90 | X | X | A | A | A | A |
| FKM (Viton-type) | −20 to +200 | 50 to 95 | A | A | A | C | C | A |
| NBR | −40 to +120 | 20 to 100 | A | B | C | B | B | D |
| Neoprene (CR) | −40 to +120 | 15 to 95 | B | C | C | B | B | B |
| SBR | −50 to +100 | 30 to 100 | X | X | C | B | B | D |
Key: A Excellent · B Good · C Fair · D Poor · X Not suitable
Figures are the typical range across commercial compounds. Special grades extend several of these limits: silicone to −117°C and +260°C, FKM to −40°C, NBR to −57°C. Figures are indicative and are confirmed for your application before tooling.
Sources: o-ring.info, Basic properties of elastomers; Mykin Inc, Rubber properties; Delta Rubber, Rubber material comparison guide; GMORS, VMQ silicone (silicone temperature range).
What to send with an RFQ
A drawing or CAD file, or a sample or photo. The approximate quantity. The operating conditions: temperature, fluid, load or movement. A material preference if you have one. If you are unsure of anything, send what you have and we will ask.
How we review it
We look at the geometry, the process, the material and the actual service conditions before we recommend a compound. The compound is confirmed with you before any tooling is cut.
Common questions
Can you make a rubber part from a drawing?
Which rubber materials do you work with?
Do you make both moulded and extruded parts?
How do I get a quote?
Have a drawing or a sample?
Send your RFQ
Tell us what you need. Fields marked * are required. Everything else helps us recommend the compound.
Exonel Industries makes custom moulded and extruded rubber components in Howrah, Kolkata, West Bengal, and supplies manufacturers across India. We work in six base polymers, Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into hundreds of compounds. Compounding, tooling and production are done in-house. Send a drawing, a sample or a specification for a quote.