Home Products Standard Range Materials Industries Capabilities Quality About FAQ Guides Send RFQ
Home › Custom Moulded Rubber
Solution: Moulded rubber

Custom moulded rubber components, from drawing to production

Exonel compression-moulds rubber parts to drawing: gaskets, seals, O-rings, grommets, washers, bushes and rubber-to-metal bonded mounts. Moulds are made in-house, the compound is matched to the duty, and the same tooling runs from prototype to production.

Compression moulding
Rubber-to-metal bonding
In-house tooling
Six polymers
What we mould

Parts with geometry.

Gaskets and seals

Complex and stepped seals moulded in one piece.

O-rings

Standard, metric and custom sizes.

Grommets

Cable and hose grommets designed for IP67/IP68 sealing applications.

Washers and spacers

Flat, shouldered and insulating washers.

Bushes and mounts

Rubber bonded to steel inserts for load-carrying mounts.

Bespoke parts

Any moulded rubber part with a drawing or a sample.

Material comparison

Six base polymers, compared.

Temperature range, hardness and resistance for typical commercial compounds of each polymer. Ratings run from A (excellent) to X (not suitable).

MaterialTemp range (°C)Hardness (Shore A)OilFuelAcidBaseWater / steamOzone / weather
Silicone (VMQ)−60 to +22520 to 90CDCCBA
EPDM−45 to +15030 to 90XXAAAA
FKM (Viton-type)−20 to +20050 to 95AAACCA
NBR−40 to +12020 to 100ABCBBD
Neoprene (CR)−40 to +12015 to 95BCCBBB
SBR−50 to +10030 to 100XXCBBD

Key: A Excellent · B Good · C Fair · D Poor · X Not suitable

Figures are the typical range across commercial compounds. Special grades extend several of these limits: silicone to −117°C and +260°C, FKM to −40°C, NBR to −57°C. Figures are indicative and are confirmed for your application before tooling.

Sources: o-ring.info, Basic properties of elastomers; Mykin Inc, Rubber properties; Delta Rubber, Rubber material comparison guide; GMORS, VMQ silicone (silicone temperature range).

Sending an enquiry

What to send

The part drawing or CAD file, or a sample. The fluid and temperature it sees. The quantity. For bonded parts, the insert drawing or the insert itself.

How we respond

How we review it

Geometry first, then process and compound. We flag anything in the drawing that will be difficult to mould before the tool is cut.

FAQ

Common questions

What moulding process do you use?
Compression moulding, with rubber-to-metal bonding where the part needs an insert.
Do you make the moulds yourself?
Yes. Tooling is made in-house for your part.
What quantities do you handle?
Production runs for OEMs, after sample and first-off approval. Tell us your yearly quantity and we confirm what works.
Can you mould from a sample without a drawing?
Yes. We measure the sample and draw it up before tooling.
Request for quote

Send your RFQ

Tell us what you need. Fields marked * are required. Everything else helps us recommend the compound.

About Exonel Industries

Exonel Industries makes custom moulded and extruded rubber components in Howrah, Kolkata, West Bengal, and supplies manufacturers across India. We work in six base polymers, Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into hundreds of compounds. Compounding, tooling and production are done in-house. Send a drawing, a sample or a specification for a quote.

💬 ✉
WhatsApp Call Email Send RFQ