Home Products Standard Range Materials Industries Capabilities Quality About FAQ Guides Send RFQ
Home › Products › Rubber and Silicone Sheets
Product: Sheets and cut parts

Rubber and silicone sheets

Rubber and silicone sheets in the compound your application needs, with thickness, size and hardness confirmed at quotation. Use them as supplied, or have us cut gaskets, washers and pads from them to your drawing.

PolymersSilicone, EPDM, NBR, Neoprene, SBR, FKM
Hardness20 to 90 Shore A (indicative)
Thickness and sheet sizeConfirmed at quotation
SupplySheets, or parts cut to your drawing

Figures are indicative and are confirmed for your application before tooling.

What we supply

Sheets and parts cut from them.

Rubber sheets

EPDM, NBR, neoprene, SBR and FKM sheets, in the thickness and hardness the job needs.

Silicone sheets

Silicone rubber sheets for heat, cold and clean service. Food-contact grades on request.

Cut parts

Gaskets, washers and pads cut from sheet to your drawing.

Material fit

Pick the sheet by what it touches.

Silicone

Heat and cold, about −60 to +225°C.

EPDM

Weather, ozone, water and steam. Not for oil or fuel.

NBR

Mineral oil, fuel and hydraulic fluid, to about +120°C.

Neoprene (CR)

Weather with some oil.

FKM (Viton-type)

Oil, fuel and many aggressive chemicals at heat, to about +200°C.

SBR

General-purpose use with good abrasion resistance. Not for oil.

How to specify

What to send us

Send the polymer (or the duty, if you are not sure), the thickness, the hardness, the sheet size or the drawing of the part to be cut, any colour, and the quantity per year.

FAQ

Common questions

Which rubber sheet is best for oil?
NBR for mineral oil and fuel, to about +120°C. FKM where oil or fuel comes with heat, to about +200°C.
Do you make food-contact silicone sheets?
Yes. Food-contact and medical-application grades can be compounded on request. Certification, where required, is arranged by the customer.
Can you cut gaskets from sheet?
Yes. Send the drawing and we cut gaskets, washers or pads from the sheet.
Silicone or EPDM sheet for outdoor use?
Both resist weather and ozone. EPDM for most outdoor use within about −45 to +150°C; silicone where the part runs hotter or colder.
Request for quote

Send your RFQ

Tell us what you need. Fields marked * are required. Everything else helps us recommend the compound.

About Exonel Industries

Exonel Industries makes custom moulded and extruded rubber components in Howrah, Kolkata, West Bengal, and supplies manufacturers across India. We work in six base polymers, Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into hundreds of compounds. Compounding, tooling and production are done in-house. Send a drawing, a sample or a specification for a quote.

💬 ✉
WhatsApp Call Email Send RFQ