Home Products Standard Range Materials Industries Capabilities Quality About FAQ Guides Send RFQ
Home › Custom Extruded Profiles
Solution: Rubber extrusion

Custom extruded rubber profiles, built to your section

Exonel extrudes rubber profiles, channels, strips, cords, tubing and sponge sections to your cross-section, in the length you need. Dies are cut in-house from your drawing or a sample profile, in silicone, EPDM, neoprene or NBR.

Constant section
Any length
Solid and sponge
Dies in-house
What we extrude

Constant section, any length.

Profiles and channels

Door and window seals, edge trims, U-channels and custom sections.

Strips and cords

Solid and sponge strip and cord for sealing and masking.

Tubing

Silicone tube to your bore and wall.

Sponge sections

Closed-cell silicone and EPDM sponge for low-force sealing.

Joined frames

Profile cut and vulcanised into endless frames and rings.

Dies in-house

Cut from your .dwg or .dxf file or a sample profile.

Material comparison

Six base polymers, compared.

Temperature range, hardness and resistance for typical commercial compounds of each polymer. Ratings run from A (excellent) to X (not suitable).

MaterialTemp range (°C)Hardness (Shore A)OilFuelAcidBaseWater / steamOzone / weather
Silicone (VMQ)−60 to +22520 to 90CDCCBA
EPDM−45 to +15030 to 90XXAAAA
FKM (Viton-type)−20 to +20050 to 95AAACCA
NBR−40 to +12020 to 100ABCBBD
Neoprene (CR)−40 to +12015 to 95BCCBBB
SBR−50 to +10030 to 100XXCBBD

Key: A Excellent · B Good · C Fair · D Poor · X Not suitable

Figures are the typical range across commercial compounds. Special grades extend several of these limits: silicone to −117°C and +260°C, FKM to −40°C, NBR to −57°C. Figures are indicative and are confirmed for your application before tooling.

Sources: o-ring.info, Basic properties of elastomers; Mykin Inc, Rubber properties; Delta Rubber, Rubber material comparison guide; GMORS, VMQ silicone (silicone temperature range).

Sending an enquiry

What to send

The section drawing or a sample of the profile, the length or the total quantity, the temperature and exposure, and whether it is solid or sponge.

How we respond

How we review it

We check the section for extrudability, recommend the compound and confirm the die drawing with you before cutting it.

FAQ

Common questions

Can you extrude a profile from my drawing?
Yes. We cut the die in-house from your drawing or from a sample.
What is the maximum length?
Profiles are extruded continuously and cut to the length you specify.
Which rubber is best for outdoor profiles?
EPDM and silicone. Both resist ozone, UV and weathering.
Do you make sponge profiles?
Yes. Closed-cell silicone and EPDM sponge.
Request for quote

Send your RFQ

Tell us what you need. Fields marked * are required. Everything else helps us recommend the compound.

About Exonel Industries

Exonel Industries makes custom moulded and extruded rubber components in Howrah, Kolkata, West Bengal, and supplies manufacturers across India. We work in six base polymers, Silicone, EPDM, FKM, NBR, Neoprene and SBR, formulated into hundreds of compounds. Compounding, tooling and production are done in-house. Send a drawing, a sample or a specification for a quote.

💬 ✉
WhatsApp Call Email Send RFQ